Products

WATER BATHS

Compact & light weight design, to fulfill boiling temperature requirements in R & D and Q.C. Labs, with fine accuracy.

APPLICATIONS

General Chemical And Biological Uses, Bacterial Examination, Corrosion Testing, Serology Testing, Melting Samples, Warming Samples, Food Processing, Immunology Testing and others..

Salient Features

  •  Fully made of stainless steel with powder coated paint finish and mat finish for GMP.
  •  Temperature controlled with Advance Digital PID type Temperature Controller
  •  Temperature Range: Ambient +50 to 990C
  •  Working Range: Ambient +50to 990C
  •  Heater: Electrically heated water immersion heaters as per IS Standard.
  •  Heat up time up to 99°C within 30 Minutes, Accuracy +/-10C minimum resolution of 1°C.
  •  For safety settable over shoot Alarm and safety fuse
  •  Insulated with high heat resistive cera wool insulation.
  •  Operating voltage 230 volts AC, 50 Hz
  •  All above water baths are available in both type regular and GMP (Good Manufacturing Practices)
  •  Documentation Design Qualification, Installation Qualification, Operational Qualification, Performace Qualification and Calibration certificates provide if necessiate.

TYPES OF WATER BATHS:

  •  SUITABLE FOR R B(Round Bottom) FLASK (1,2,3)
  •  CONCENTIRC RINGS TYPES WATER BATH (4,5,6)
  •  CONSTANT TEMPERATURE WATER BATH
  •  UNIVERSAL WATER BATH (7)

SIZE SUITABLE for ROUND BOTTOM FLASK WATER BATH

Flask Capacity Inner Tank Size

Outer Size

Rating
1 Liter 175 mm 150 mm 225 mm 180 mm 1000 W
2 Liter 210 mm 180 mm 260 mm 200 mm 1000 W
3 Liter 230 mm 200 mm 280 mm 230 mm 1200 W
5 Liter 255 mm 230 mm 300 mm 250 mm 1500 W
10 Liter 360 mm 300 mm 440 mm 330 mm 2000 W
20 Liter 460 mm 350 mm 560 mm 410 mm 3000 W

STANDARD SIZES for CONSTANT TEMPERATURE & UNIVERSAL WATER BATH

Working Size

Rating

Length x Width x Depth (WATTS)
300mm x 250mm x 200mm 1500 W
360mm x 300mm x 250mm 2000 W
460mm x 360mm x 300mm 2500 W

STANDARD SIZES for CONCENTRIC RINGS WATER BATH

Working Size
Length x Width x Depth
Number of Holes
(76 mm (3”) Diameter Hole)
Rating
(WATTS)
350 mm x 250 mm x 100 mm 6 Holes 1000 W
460 mm x 360 mm x 100 mm 12 Holes 1500 W